[活動] Raspberry Pi社群聚會 #25 @2019/04/29

raspberry_pi_metup_25_hat_banner_1200x630

RSVP:Raspberry Pi Meetup #25
The 25th of the Raspberry Pi meetup, the topic is “Raspberry Pi HAT”.

Speaker 1:Larry (Joybien Technologies))
Topic:5G mmWave IoT Sensor Introduction & Application
1) mmWave Technology Introduction
2) Joybien mmWave Solution Platform
3) mmWave Sensor Application: Vital Signs Detection (VSD)
4) mmWave Sensor Application: People Movement Behavior (PMB)
5) mmWave Sensor Application: High Accuracy Measurement (HAM)
6) DEMO: VSD & PMB & HAM with Raspberry Pi Interaction

Speaker 2: sosorry
Topic: The introduction of Raspberry Pi TV HAT and NanoSound DAC

Lightning Talk: Jack (Sivann)
Topic: TestMate circuit testing good partner
1) Introduction to TestMate
2) Application of RPi and TestMate

Additional Information:

  • 2019/04/29 19:10 ~ 21:30
  • 2F., No.105, Sec. 1, Chongqing S. Rd., Zhongzheng Dist., Taipei City
  • $150 per person

* Safeguarding

- – – – – – – – – - 以下為中文 – – – – – – – – – -

報名:Raspberry Pi社群聚會 #25

第二十五次 Raspberry Pi 社群聚會,希望能透過社群活動的分享和交流,找到更多 Raspberry Pi 的可能。本次主題是「樹莓派擴充板(HAT)應用」。

分享者1:Larry (玖邦科技))
題目:5G 毫米波物聯網感測應用介紹
1) 毫米波技術介紹
2) 玖邦科技 毫米波方案平台
3) 毫米波感測應用: 生命跡象偵測 (VSD)
4) 毫米波感測應用: 人員動態行為 (PMB)
5) 毫米波感測應用: 高精度量測 (HAM)
6) DEMO: 與樹莓派互動的生命跡象偵測 (VSD) & 人員動態行為 (PMB) & 高精度量測 (HAM)

分享者2:sosorry(台灣樹莓派)
題目:樹莓派電視擴充板(TV HAT)和 NanoSound

閃點講:Jack (愛文西門科技)
題目:TestMate 測試電路的好夥伴
1) TestMate 介紹
2) RPi 與 TestMate 的小應用

活動資訊

  • 活動時間: 2019/04/29(週一) 19:10 ~ 21:30 (6:40pm 開始入場)
  • 活動人數上限: 100
  • 活動地點:台北市重慶南路一段105號2樓(天瓏書局)

費用

  • 每人150元場地費用
  • 帶作品展示的參加者免收場地費用

備註

  • 活動場地有提供無線網路

* 安全措施

報名:Raspberry Pi社群聚會 #25

[產品] Raspberry Pi TV HAT 擴充板

raspberry-pi-tv-hat-4in1

※現貨,可立即出貨!

This add-on board lets you receive digital DVB-T2 TV streams on your Raspberry Pi to view them or stream them over a network to other devices.

《特色》

TO GET STARTED YOU’LL NEED:

  • Any 40-pin Raspberry Pi (including Pi Zero and Zero W, provided they have headers soldered)
    • Any Raspberry Pi can be used to stream to other devices
    • A Raspberry Pi 2 or 3 (or later) is recommended for viewing TV on the Pi itself
  • A suitable aerial to receive broadcast TV (not provided)

We’ve put together a downloadable step-by-step guide to Getting started with the TV HAT, which walks you through the complete setup process.

《規格》

The Raspberry Pi TV HAT has a DVB-T2 and DVB-T tuner on board, which allows you to receive and decode digital television streams on your Raspberry Pi.

  • Sony CXD2880 TV tuner
  • Supported TV standards:
    • DVB-T2 (1.7MHz, 5MHz, 6MHz, 7MHz, 8MHz channel bandwidth)
    • DVB-T (5MHz, 6MHz, 7MHz, 8MHz channel bandwidth)
  • Reception frequency: VHF III, UHF IV, UHF V

PRODUCT BRIEF, MECHANICAL DRAWINGS, AND SCHEMATICS

HARDWARE SPECIFICATIONS

More detailed information on Raspberry Pi hardware is available.

OBSOLESCENCE STATEMENT

The Raspberry Pi TV HAT will remain in production until at least January 2023.

《軟體&下載》

SOFTWARE INSTALLATION

OPERATING SYSTEM

Raspbian Stretch (or later) is required for using the TV HAT. Download the latest version of Raspbian here.

For how to install Raspbian, see our online guide to Getting started with your Pi.

SOFTWARE

The software we recommend for decoding TV streams and viewing content is TVHeadend. Instructions for setting this up are in our  guide to Getting started with the TV HAT.

MEDIA PLAYER SUPPORT

  • Kodi
  • OMXplayer
  • LibreELEC

* 注意:本商品不包含 Raspberry Pi 主板。

$ 945 



※若無法使用Paypal購買,請到 這裡 填寫表單購買,造成您的不便敬請見諒。