[活動] Raspberry Pi社群聚會 #27 @2019/09/30

20190930_meetup_27_compute_module_1800x945

[公告] Raspberry Pi社群聚會 #27 (09/30)取消。

因為颱風逼近,台北已停班停課。為了安全起見,本次活動取消。預計十一月或是十二月會再邀請講者來分享。

RSVP:Raspberry Pi Meetup #27
The 27th of the Raspberry Pi meetup, the topic is “Applications of Raspberry Pi Compute Module”.

Speaker 1:Alvin(Creative5)
Topic:How to use CM3 on
1) The solar monitor system,
2) The application of solar panels for agricultural,
3) HEMS/BEMS

Speaker 2:sosorry(台灣樹莓派)
Topic:Stereo Pi – DIY stereoscopic camera with Raspberry Pi Compute Module
1) Introduction to Compute Module and applications
2) Introduction to Stereo Pi and demo

Additional Information:

  • 2019/09/30 19:10 ~ 21:30
  • 2F., No.105, Sec. 1, Chongqing S. Rd., Zhongzheng Dist., Taipei City
  • $150 per person

* Safeguarding

- – – – – – – – – - 以下為中文 – – – – – – – – – -

報名:Raspberry Pi社群聚會 #27

第二十七次 Raspberry Pi 社群聚會,希望能透過社群活動的分享和交流,找到更多 Raspberry Pi 的可能。本次主題是「Raspberry Pi Compute Module 應用」。

分享者1:Alvin(Creative5)
題目:題目:如何採用樹莓派CM3 , 應用在
1) 太陽能雲端監視系統、
2) 太陽能農棚的應用、
3) HEMS/BEMS

分享者2:sosorry(台灣樹莓派)
題目:Stereo Pi – 使用 Compute Module 製作立體鏡頭
簡介:Stereo Pi 是基於 Compute Module 設計的開源雙相機開發板,可以處理即時的立體影片和圖片。在機器人、VR/AR、電腦視覺、無人機、全景視訊等領域提供了可能性。
大綱:
1) Compute Module 介紹與應用
2) Stereo Pi 介紹與展示

活動資訊

  • 活動時間: 2019/09/30(週一) 19:10 ~ 21:30 (6:40pm 開始入場)
  • 活動人數上限: 100
  • 活動地點:台北市重慶南路一段105號2樓(天瓏書局)

費用

  • 每人150元場地費用
  • 帶作品展示的參加者免收場地費用

備註

  • 活動場地有提供無線網路

* 安全措施

報名:Raspberry Pi社群聚會 #27

[新聞] Compute Module 3+釋出

compute-module-3-plus-front

Raspberry Pi Compute Module 出新版了!

Raspberry Pi 自從 2012 年第一批開始販售,截至 2018 年底累積銷售達 23,000,000 台。

raspberry_pi_sales_20181221
圖片來源:Raspberry Pi Sales

為了滿足廠商的量產需求,樹莓派基金會在 2014 年推出第一代的 Compute Module 1,目的是讓廠商可以基於樹莓派的硬體核心設計自己的產品,而不限於原本的界面。

此外,基金會也授權 element14 可協助廠商進行客製化的量產服務,讓中小企業也可以根據自己的需求享受小量的客製化設計與製造服務。

雖然有了客製化服務,但原本的 Compute Module 運算模組仍然持續升級,例如在 2017 年推出以 Raspberry Pi 3B 為基礎的 Compute Module 3,現在更升級成和 Raspberry Pi 3B+ 使用相同的 Broadcom BCM2837B0 SoC。

《不變之處》

  • 如同之前的 Compute Module 設計,Compute Module 3+ 像是精簡版的 Pi 3B+,上面並沒有 USB、RJ45、HDMI 等界面,因此體積更小可嵌入到自行設計的裝置中。
  • 並且使用者可以另外購買 Compute Module IO Board,用來轉接出各種 I/O 端子與擴充介面。

compute_module_3bp_io_board

《新的改變》

  • Compute Module 3+ 有較佳的散熱效果,因此可維持較低的平均運作溫度。
  • 增加 eMMC 大小,共分為 8GB、16GB、32GB 等不同版本。
  • 由於電源限制,雖然使用 Broadcom BCM2837B0 SoC,但最大處理器速度保持在 1.2GHz,而非 1.4GHz。

compute-module-3-plus-back

《CM型號比較表》

型號: CM1 CM3 CM3L CM3+ CM3+L
發表日: 2014/04 2017/01 2017/01 2019/01 2019/01
處理器: BCM2835 BCM2837 BCM2837 BCM8237B0 BCM8237B0
記憶體: 512MB 1GB 1GB 1GB 1GB
eMMC: 4GB 4GB N/A 8/16/32GB N/A

《成功案例》

新聞來源:
* Compute Module 3+ on sale now from $25

CM3B+ 已經到貨,馬上購買!

[產品] Raspberry Pi Compute module 3+ / 8GB (CM3+/8GB)

Raspberry Pi Compute Module 3 + 8GB eMMC -  CM3+/8GB

compute-module-3-plus-front

The Compute Module 3+ (CM3+) is a Raspberry Pi 3 Model B+ in a flexible form fator, intended for industrial applications.

《特色》

The CM3+/8GB Compute Module contains the guts of a Raspberry Pi 3 Model B+ (the BCM2837 processor and 1GB RAM) as well as an 8GB eMMC Flash device (which is the equivalent of the SD card in the Pi).

  • Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.2GHz
  • 1GB LPDDR2 SDRAM
  • 8GB eMMC Flash memory

This is all integrated onto a small (67.6mm × 31mm) board that fits into a standard DDR2 SODIMM connector. The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available than with a standard Raspberry Pi), and designing the Module into a custom system should be relatively straightforward because we’ve put all the tricky bits onto the Module itself.

To help you get started designing a PCB to use the Module, we provide an open-source breakout board, which is supplied with both a CM3+/32GB and a CM3+/Lite in an affordable development kit.
購買CM3+/8GB $1260 


※若無法使用Paypal購買,請到 這裡 填寫表單購買,造成您的不便敬請見諒。

※請到 這裡 填寫表單購買,造成您的不便敬請見諒。

[產品] Raspberry Pi Compute module 3 (CM3)

Raspberry Pi Compute module 3

RPI-COMPUTE3-2in1

The Raspberry Pi Compute Module 3 (CM3) and Compute Module 3 Lite (CM3L) are DDR2-SODIMM-mechanically-compatible System on Modules (SoMs) containing processor, memory, eMMC Flash (CM3 only) and supporting power circuitry. These modules allow a designer to leverage the Raspberry Pi hardware and software stack in their own custom systems and form factors. In addition the modules have extra IO interfaces over and above what is available on the Raspberry Pi model A/B boards, providing more options for the designer.

《特色》

The Compute Module 3 contains the following components contained within a 200 pin SODIMM design:

  • Broadcom BCM2837 processor
  • 1Gbyte LPDDR2 RAM
  • 4Gbytes eMMC Flash
  • 35u hard gold plated IO Pins

單買CM3 $1470 



Raspberry Pi Compute module 3 Lite

RPI-COMPUTE3-LT-2in1

《特色》

The Compute Module 3 Lite product is the same as the Compute Module 3 except the eMMC Flash is not fitted, and the SD/eMMC interface pins are available for the user to connect their own SD/eMMC device The Compute Module 3 Lite contains the following components contained within a 200 pin SODIMM design:

  • Broadcom BCM2837 processor
  • 1Gbyte LPDDR2 RAM
  • 35u hard gold plated IO Pins

(N.B. when operating with the IO Board, an SD card with a suitable image must be connected to the IO board for the system to work)
單買CM3 Lite $1260 



Raspberry Pi 3 Compute Module I/O

Raspberry-Pi-3-compute-module-IO-2in1

《特色》

This is the main development kit IO board into which the Compute Module SODIMM board is connected. It also contains all of the necessary interface ports to allow an engineer to design and test their own prototype application.

The IO board contains the following interfaces:

  • Multiple GPIO interfaces on 2 60 way 0.1” Headers
  • 1 x Micro USB connector type B – USB Slave
  • 1 x USB connector type A – USB Host
  • 2 x CSI ports for camera boards
  • 2 x DSI ports for display boards
  • Full size HDMI port
  • Micro USB power connector
  • Micro SD connector

單買Compute Module I/O Board $5150



Raspberry Pi Compute Module 3 Development Kit

RPI-COMPUTE3-KIT-4in1

《特色》

The Raspberry Pi Compute Module 3 Development Kit contains the following components:

  • 1 x Raspberry Pi Compute Module 3
  • 1 x Raspberry Pi Compute Module 3 Lite
  • 1 x Raspberry Pi Compute Module IO Board
  • 1 x Raspberry Pi Compute Module IO Board Camera Display Adaptor
  • 1 x 5v 2.5A Power Supply
  • 1 x USB A to micro B cable
  • 4 x Jumper wires

《下載》

The schematics and board design files for the Compute Module IO board have been published by the Raspberry Pi Foundation and detail the interconnection between the SODIMM socket and the interfaces on the IO board. These can be found at: https://www.raspberrypi.org/documentation/hardware/computemodule/

購買全套CM3 Development Kit $8200 


※若無法使用Paypal購買,請到 這裡 填寫表單購買,造成您的不便敬請見諒。