《特色》
* 專為 Raspberry Pi Build HAT 設計的 48W 電源，8V/6A。
* 搭配 Raspberry Pi Build HAT 擴充板套件可讓 Maker 快速開發，專注在創新應用上。
《Output 規格》
| Output voltage: | +8.0V DC |
| min load current: | 0.01A |
| normal current: | 6.0A |
| Max power: | 48.0W |
| Load regulation: | ±5% |
| Line regulation: | ±5% |
| Ripple & noise: | 200mVp-p |
| Rise time: | 100ms maximum to regulation limits for DC outputs |
| Turn-on delay: | 3000ms maximum at nominal input AC voltage and full load |
| Protection: | Short circuit protection / Overcurrent protection / Overvoltage protection |
| Efficiency: | 87.77% minimum (output current from 100%; 75%; 50%; 25%) |
| Output cable: | 1.5m 16AWG |
| Output connector: | Barrel connector; 5.5mm × 2.1mm × 11mm; Center positive |
《Input 規格》
| Voltage range: | 100-240Vac (rated); 96-264Vac (operating) |
| Frequency: | 50/60Hz ±3Hz |
| Current: | 1.2A maximum |
| Power consumption: | 0.1W maximum |
| Inrush current: | No damage shall occur and the input fuse shall not blow |
《下載/文件》
* Product Brief
* Getting Started with the Build HAT
$630
※若無法使用Paypal購買，請到 這裡 填寫表單購買，造成您的不便敬請見諒。