[產品] RN2483 LoRa Technology Mote 低功率 LoRa 開發套件

RN2483-LoRa-Technology-mote-1 The RN2483 LoRa® Mote is a LoRaWAN™ Class A end-device based on the RN2483 LoRa modem. As a standalone battery-powered node, the Mote provides a convenient platform to quickly demonstrate the long-range capabilities of the modem, as well as to verify inter-operability when connecting to LoRaWAN v1.0 compliant gateways and infrastructure.

The Mote includes light and temperature sensors to generate data, which are transmitted either on a fixed schedule or initiated by a button-press. An LCD display provides feedback on connection status, sensor values and downlink data or acknowledgements. A standard USB interface is provided for connection to a host computer, providing a bridge to the UART interface of the RN2483 modem. As with all Microchip RN family of products, this enables rapid setup and control of the on-board LoRaWAN protocol stack using the high level ASCII command set.

《特色》
* 868 MHz High-Frequency SMA Connector
* 433 MHz Low-Frequency Antenna test Point
* USB Mini-B Connector
* PIC18LF45K50 8-bit MCU
* Mote ICSP Programming
* LCD Display
* S1 & S2 Switches (for Menu Navigation)
* Ambient Light Sensor
* Linear Active Thermistor (MCP9700T)
* LDO Regulator (MCP1825S)
* Descriptive LEDs, (2) Controlled by PIC18, (2) Controlled by Module
* (2) AAA Battery Pack
* Battery Power Switch
* Alternative Power Supply Through Hole Connectors

 

RN2483-LoRa-Technology-mote-2

《規格》
* Manufacturer: Microchip
* Frequency: 433 MHz, 868 MHz/915 MHz
* Output Power: 14dBm
* Operating Temperature Range: -40ºC to 85ºC
* Input Sensitivity -148mVpp
* Rx Input Sensitivity -148dB
* TX Current Consumption: 40mA (14dBm, 868MHz)
* RX Current Consumption: 14.2mA
* Interface Type: UART
* Unit Weight: 221.400 g

《套件內容》
* RN2483 LoRa® Technology Mote
* SMA Antenna
* USB (standard-A to mini-B) cable
* Info Sheet DS50002391
* Pack Lis

《下載》
LoRa Technology Mote User’s Guide
LoRa Technology Mote (OLED version) Source Code
LoRa Technology Mote (LCD version) Source Code

$2900 

※若無法使用Paypal購買,請到 這裡 填寫表單購買,造成您的不便敬請見諒。

[產品] FLiR Dev Kit 紅外線熱影像開發套件

FLiR_Dev_Kit

《特色》
* 使用 Lepton® 長波紅外線(LWIR)相機模組
* 80×60 解析度
* 可搭配其他相機模組融合式的顯像
* 可以使用樹莓派(或是其他 ARM 架構的開發板)輕鬆開發熱影像應用

《規格》
* LWIR 感測器,可偵測波長 8 到 14 μm
* 水平視角 51 度,對角視角 63.5 度
* 80 (h) × 60 (v) 有效像素
* 熱靈敏度 <50 mK
* 提供 MIPI 和 SPI 影像介面
* 提供類 I2C 串列介面
* 快速影像響應時間(< 0.5 秒)
* 低功耗(< 160 mW)

《出貨清單》
* FLiR Lepton® 熱成像相機模組(Thermal Imaging Module)
* FLiR Lepton® 熱成像相機開發板(Breakout Board)
* 注意:此套件分為兩個部分,一旦收到,就需要組裝。 Lepton®模塊對靜電放電(ESD)非常敏感。將其插入開發板時,請務必使用適當的個人接地,如接地手環等,以防止損壞相機模組。

《使用教學》
* Hookup Guide
* GitHub (Library, Example Code, & Design Files)
* Raspberry Pi特色相機介紹(熱成像攝影機+微距相機)
* 雙相機融合顯像

《下載》
* Schematic
* Datasheet (Lepton®)
* SDK(32bit)
* SDK(64bit)
* Reverse-Engineering the Lepton®

《範例程式》
* https://github.com/raspberrypi-tw/meetup19

FLiR_Dev_Kit_4in1

$8900 

※若無法使用Paypal購買,請到 這裡 填寫表單購買,造成您的不便敬請見諒。