[產品] Raspberry Pi PoE HAT (Power over Ethernet) 擴充板

Raspberry-Pi-PoE-HAT-4in1

※改版中,暫時缺貨!

The Raspberry Pi PoE HAT powers a Raspberry Pi 3 Model B+ via an Ethernet cable. Power-sourcing equipment is required on the Ethernet network.

《特色》

The Raspberry Pi Power over Ethernet HAT is a small accessory for the Raspberry Pi computer. It can only be used with the Raspberry Pi 3 Model B+ (launched March 2018). The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet–enabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.

Supplied with this product

  • Raspberry Pi PoE HAT
  • Mechanical spacers

Other hardware needed

Connecting your PoE HAT to the Raspberry Pi

  • Before installing the PoE HAT, you must attach the supplied spacers in the four corners of the board
  • Then connect the Raspberry Pi PoE HAT to the two 0.1” headers (40 + 4) that are fitted on the Raspberry Pi
  • Once the PoE HAT board is connected, you can power the Raspberry Pi through its RJ45 network connector

Disconnecting your PoE HAT

  • Take care when separating the HAT from the Pi
  • Pull evenly so that it detaches from all the pins at the same rate; do not pull one end of the connector off before the other

Additional information

No modification to the main Raspberry Pi board is needed for this product to work. Please ensure that your Raspberry Pi’s software is up to date for all functionality to be available. The PoE HAT is fitted with a small fan that is controlled by the Raspberry Pi via I2C. The fan will turn on and off automatically depending on the temperature of the main processor on the Raspberry Pi.

《規格》

The Raspberry Pi PoE HAT is an add-on board for the Raspberry Pi 3 Model B+. It allows the Raspberry Pi to be powered via a power-enabled Ethernet network.

  • 802.3af PoE
  • Fully isolated switched-mode power supply
  • 37–57V DC, Class 2 device
  • 5V/2.5A DC output
  • 25mm x 25mm brushless fan for processor cooling
  • Fan control

《下載》

《安全提醒》

  • Shall only be powered using 802.3af-compliant power sourcing equipment; any external power supply used with the Raspberry Pi shall comply with relevant regulations and standards applicable in the country of intended use
  • Should be operated in a well-ventilated environment, and should not be covered
  • Should be placed on a stable, flat, non-conductive surface while in use, and should not be contacted by conductive items

Instructions for safe use

To avoid malfunction or damage to your Raspberry Pi product, please observe the following advice:

  • Do not block or obstruct the fan
  • Do not insert anything into the fan at any time
  • Do not expose the product to water or moisture, and do not place it on a conductive surface whilst it is in operation
  • Do not expose it to heat from any source; the product is designed for reliable operation at normal room temperatures
  • Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors
  • Avoid handling the Raspberry Pi while it is connected to a power outlet; only handle by the edges to minimize the risk of electrostatic discharge damage
  • All other peripherals used with the Raspberry Pi should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met; these peripherals include, but are not limited to, keyboards, monitors, and mice used in conjunction with the Raspberry Pi

* 注意:本商品不包含 Raspberry Pi 3 Model B+。

$ 840



※若無法使用Paypal購買,請到 這裡 填寫表單購買,造成您的不便敬請見諒。

[產品] Raspberry Pi 樹莓派鋰電池 電源擴充板 行動電源 雙USB輸出

RPi-PowerPack-v1.2-4in1

專為樹莓派設計的鋰電池行動電源,雙USB輸出,重量只有80g,也可用於其他USB供電等設備。

《特色》

  • 適用於B+以後版本樹莓派,Raspberry Pi A+, B+, 2B, 3B and 3B+
  • CHG LED:
    亮:充電器進行恆流充電。
    滅:充電器進行浮充,直到鋰電充滿。
  • ON LED作用:
    亮:USB 供電中。
    滅:USB 停止供電。

《規格》

  • 容量:3800mAH
  • 最大放電電流:1.4A
  • 空載輸出電壓:5.1V ±0.1V
  • 標準充電電流/電壓:1.0A@5.0V
  • 鋰電池充滿截至電壓:4.18V – 4.2V 

* 注意:本商品不包含 Raspberry Pi 主板。

$ 350



※若無法使用Paypal購買,請到 這裡 填寫表單購買,造成您的不便敬請見諒。