[產品] Raspberry Pi Build HAT Power Supply – 48W | 8V/6A 電源供應器

《特色》
* 專為 Raspberry Pi Build HAT 設計的 48W 電源,8V/6A。
* 搭配 Raspberry Pi Build HAT 擴充板套件可讓 Maker 快速開發,專注在創新應用上。

《Output 規格》

Output voltage: +8.0V DC
min load current: 0.01A
normal current: 6.0A
Max power: 48.0W
Load regulation: ±5%
Line regulation: ±5%
Ripple & noise: 200mVp-p
Rise time: 100ms maximum to regulation limits for DC outputs
Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
Protection: Short circuit protection / Overcurrent protection / Overvoltage protection
Efficiency: 87.77% minimum (output current from 100%; 75%; 50%; 25%)
Output cable: 1.5m 16AWG
Output connector: Barrel connector; 5.5mm × 2.1mm × 11mm; Center positive

《Input 規格》

Voltage range: 100-240Vac (rated); 96-264Vac (operating)
Frequency: 50/60Hz ±3Hz
Current: 1.2A maximum
Power consumption: 0.1W maximum
Inrush current: No damage shall occur and the input fuse shall not blow

《下載/文件》
* Product Brief
* Getting Started with the Build HAT

$630

※若無法使用Paypal購買,請到 這裡 填寫表單購買,造成您的不便敬請見諒。

Leave a Reply

Your email address will not be published. Required fields are marked *