[產品] Raspberry Pi Compute module 3 (CM3)

Raspberry Pi Compute module 3

RPI-COMPUTE3-2in1

The Raspberry Pi Compute Module 3 (CM3) and Compute Module 3 Lite (CM3L) are DDR2-SODIMM-mechanically-compatible System on Modules (SoMs) containing processor, memory, eMMC Flash (CM3 only) and supporting power circuitry. These modules allow a designer to leverage the Raspberry Pi hardware and software stack in their own custom systems and form factors. In addition the modules have extra IO interfaces over and above what is available on the Raspberry Pi model A/B boards, providing more options for the designer.

《特色》

The Compute Module 3 contains the following components contained within a 200 pin SODIMM design:

  • Broadcom BCM2837 processor
  • 1Gbyte LPDDR2 RAM
  • 4Gbytes eMMC Flash
  • 35u hard gold plated IO Pins

單買CM3 $1470 



Raspberry Pi Compute module 3 Lite

RPI-COMPUTE3-LT-2in1

《特色》

The Compute Module 3 Lite product is the same as the Compute Module 3 except the eMMC Flash is not fitted, and the SD/eMMC interface pins are available for the user to connect their own SD/eMMC device The Compute Module 3 Lite contains the following components contained within a 200 pin SODIMM design:

  • Broadcom BCM2837 processor
  • 1Gbyte LPDDR2 RAM
  • 35u hard gold plated IO Pins

(N.B. when operating with the IO Board, an SD card with a suitable image must be connected to the IO board for the system to work)
單買CM3 Lite $1260 



Raspberry Pi 3 Compute Module I/O

Raspberry-Pi-3-compute-module-IO-2in1

《特色》

This is the main development kit IO board into which the Compute Module SODIMM board is connected. It also contains all of the necessary interface ports to allow an engineer to design and test their own prototype application.

The IO board contains the following interfaces:

  • Multiple GPIO interfaces on 2 60 way 0.1” Headers
  • 1 x Micro USB connector type B – USB Slave
  • 1 x USB connector type A – USB Host
  • 2 x CSI ports for camera boards
  • 2 x DSI ports for display boards
  • Full size HDMI port
  • Micro USB power connector
  • Micro SD connector

單買Compute Module I/O Board $5150



Raspberry Pi Compute Module 3 Development Kit

RPI-COMPUTE3-KIT-4in1

《特色》

The Raspberry Pi Compute Module 3 Development Kit contains the following components:

  • 1 x Raspberry Pi Compute Module 3
  • 1 x Raspberry Pi Compute Module 3 Lite
  • 1 x Raspberry Pi Compute Module IO Board
  • 1 x Raspberry Pi Compute Module IO Board Camera Display Adaptor
  • 1 x 5v 2.5A Power Supply
  • 1 x USB A to micro B cable
  • 4 x Jumper wires

《下載》

The schematics and board design files for the Compute Module IO board have been published by the Raspberry Pi Foundation and detail the interconnection between the SODIMM socket and the interfaces on the IO board. These can be found at: https://www.raspberrypi.org/documentation/hardware/computemodule/

購買全套CM3 Development Kit $8200 


※若無法使用Paypal購買,請到 這裡 填寫表單購買,造成您的不便敬請見諒。

Leave a Reply

Your email address will not be published. Required fields are marked *


× two = 18


*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>